Page 1 of 1

How do you separate the ugly Abe's?

PostPosted: Mon Jun 23, 2014 2:12 pm
by DaMangRon
So I'm sorting with the ryedale and I have been hand sorting the copper to pull out the ugly abes. I just took 2 square pieces of plexiglass and put velcro around 3 edges. Throw a bunch of copper on one piece pull all the green that I can see...then put the 2nd piece on top (held in place by the velcro) and flip. Pull off the top piece and pull any green copper. Then the remaining clean copper can be poured into the bucket.

It's a lot faster than grabbing fistfuls at a time and looking at 1 coin at a time.

Re: How do you separate the ugly Abe's?

PostPosted: Mon Jun 23, 2014 7:15 pm
by 68Camaro
That's basically what I do - but it doesn't have to be see through like plexiglass. Heavy cardboard or masonite can work as well. I have an edge on mine that overlaps. Basically a large thin box with a separate lid. Put them into one half and shake until they nestle one deep. Pull out the dirties. Put the lid on and flip then repeat.

Re: How do you separate the ugly Abe's?

PostPosted: Fri Jun 27, 2014 3:03 pm
by Shazbot57
I run the zinc sort first, then during the final copper sort I pull the Ugglie's out as they drop, and switch out the tub periodically, re-rooting thru the tubs a second and final time before adding them to the final storage containers. Ugglie's go in their own separate container.