Page 1 of 1

Will be firing up the Ryedale for the first time in years...

PostPosted: Sun Aug 25, 2019 2:21 pm
by JJM
Sometime this Fall, if % are good hoping to put a ton of copper back. Will post updates along the way. Hopefully others are getting the same read from the "tea leaves" that I am....

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Sun Aug 25, 2019 4:10 pm
by MUTiger
I have been slowly going through the $5,000 in bags I stockpiled up through 2017. I had an issue with my Ryedale that I had to diagnose and fix before I could get back going again. I am averaging about 20-22 % from that time.

http://www.realcent.org/viewtopic.php?f=21&t=43247

MUTiger

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Sun Aug 25, 2019 6:33 pm
by Recyclersteve
You might need some of that Dri-Slide lubricant if your machine hasn't been used in a while. I had a small container but the contents solidified. I think I remember that you can get it at a bike shop.

And for those who would like to reminisce---

www.pennysorter.com

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Mon Aug 26, 2019 12:46 pm
by 68Camaro
JJM wrote:Sometime this Fall, if % are good hoping to put a ton of copper back. Will post updates along the way. Hopefully others are getting the same read from the "tea leaves" that I am....


It'll probably be a couple months before I can think about it but I might spin mine back up at a modest rate this winter.

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Mon Aug 26, 2019 1:50 pm
by knibloe
Recyclersteve wrote:You might need some of that Dri-Slide lubricant if your machine hasn't been used in a while. I had a small container but the contents solidified. I think I remember that you can get it at a bike shop.

And for those who would like to reminisce---

http://www.pennysorter.com


Bike aid

works good on firearms as well.

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Thu Aug 29, 2019 7:00 pm
by Cu Penny Hoarder
My Ryedale is retired and probably will remain that way.

In 2019 you'll get *maybe* 10% copper per box. Not worth the time and effort. Just look at your change, coppers are way down. A lot of copper pennies have been culled over the past couple years. There's also the dilution effect from the billions and billions of zincs minted over the past several years.

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Thu Aug 29, 2019 7:08 pm
by 68Camaro
Cent percentages vary by region, and the question of whether to sort or not will be decided by each person in their own area based on their returns and their personal situation.

For an unexplained reason I have never found copper pocket percentages to be reflective of what is in an entire box. I don't get much copper in change, but that isn't a really notable difference as I haven't gotten much since the 90s. When I was box sorting up through 5 years ago the percentages were >20%. I'll probably get another box later this year and see what comes out.

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Fri Aug 30, 2019 3:21 am
by Recyclersteve
knibloe wrote:
Recyclersteve wrote:You might need some of that Dri-Slide lubricant if your machine hasn't been used in a while. I had a small container but the contents solidified. I think I remember that you can get it at a bike shop.

And for those who would like to reminisce---

http://www.pennysorter.com


Bike aid

works good on firearms as well.


Thanks for mentioning the term "Bike aid"- Now I need to get myself into a store and get some.

Re: Will be firing up the Ryedale for the first time in year

PostPosted: Fri Aug 30, 2019 3:26 am
by Recyclersteve
68Camaro wrote: I'll probably get another box later this year and see what comes out.


Aw 'cmon- step up and get one now! :)