thedrifter wrote:I would like a system that I can even run large appliances with by directly plugging into the power generator or batteries. Also I would like something portable.
natsb88 wrote:thedrifter wrote:I would like a system that I can even run large appliances with by directly plugging into the power generator or batteries. Also I would like something portable.
Those two features are not compatible. You'll have to pick one or the other.
justoneguy wrote:natsb88 wrote:thedrifter wrote:I would like a system that I can even run large appliances with by directly plugging into the power generator or batteries. Also I would like something portable.
Those two features are not compatible. You'll have to pick one or the other.
you can actually run whatever you want.
it's a matter of panel wattage, battery capacity, inverter sizing, + how long you need to run those appliances.
justoneguy wrote:while the LFP200 SYSTEM is a really cool looking system, it's very expensive @ about $32 a watt 360 watt total for the solar panels.
to try to figure out what you need/want, try starting here.
i have never used them, but they seem to have decent prices, off grid systems with batteries from about $6 a watt.
here is their learning center.
http://www.affordable-solar.com/Learning-Center
NiBullionCu wrote:Everything you could want to know:
http://homepower.com/home/
Be warned, you can lose days on that site...
Engineer wrote:You might want to look into glass mat batteries.
http://www.dcbattery.com/agmtech.html
68Camaro wrote:I was at least somewhat happy with the setup, for what it is. To get max current I had to try to keep it in direct sun and aimed right, which is a challenge in our yard, but when I did I could get 14+ watts out of it. Max was .98 A at 14.2V. So it does what it says, and it managed to charge the battery (or top it off, probably more like it) during the 4-5 hours it was outside. But I think my $20 inverter is pretty crappy - it couldn't even power my supposedly 160W coffee grinder, though I'm sure the start-up current is much higher - it would click then stop. If someone has inverter suggestions I'd be interested in knowing where to get the most bang for buck on a lower-end unit.
68Camaro wrote:Engineer wrote:You might want to look into glass mat batteries.
http://www.dcbattery.com/agmtech.html
This little one I got from HF supposely uses that technology, but the battery is just 35Ah and I'm going to want something several times larger at some point. Do you have any specific suggestions from your link above I can focus on?
Engineer wrote:68Camaro wrote:I was at least somewhat happy with the setup, for what it is. To get max current I had to try to keep it in direct sun and aimed right, which is a challenge in our yard, but when I did I could get 14+ watts out of it. Max was .98 A at 14.2V. So it does what it says, and it managed to charge the battery (or top it off, probably more like it) during the 4-5 hours it was outside. But I think my $20 inverter is pretty crappy - it couldn't even power my supposedly 160W coffee grinder, though I'm sure the start-up current is much higher - it would click then stop. If someone has inverter suggestions I'd be interested in knowing where to get the most bang for buck on a lower-end unit.
Most inverters will advertise peak power, while power draining stuff gets advertised at it's normal load...so at a minimum you should buy twice the inverter as your expected load. (your coffee grinder is probably rated 160w running empty, so you might even want a 600w)
I have a cheap 350w for the car, but don't know the best unit for your purpose. It would be nice if you could find one with a big enough heat sink to avoid the parasitic loss of running a fan.
justoneguy wrote:I have upgraded my cabin slightly.
I found "rebuilt" deep cycle batteries at Interstate battery's main warehouse.
I bought 3 class 27 115AH?[ like a large car battery size] for $30 each.. Score!!!
I bought a 10 light string on a hundred foot cord for $20 [these are generally used for new construction lighting].
with all 10 cfl bulbs turned on it draws less than 150 watts.
I normally only use 1-4 lights at a time, but It's nice to be able to have all the light i'd ever want.
I purchased 3, 400 watt inverters on ebay for a total of $45.
These have a digital display showing, Battery charge [volts] AC voltage, and watts being used
I'm only using 1 currently, that works for all my general use power.
I bought a xantrex 1500 watt inverter off craigslist for $60 another SCORE !!
but I never really use it. for now, if I want to saw wood, or vacuum, I fire up a small 1000 watt generator.
I also found 3, 20 amp "morningstar" charge controllers for $50
that sure beats the 40 amp xantrex I paid $150 for.
I found 12, 175 watt panels [shattered but functioning at full voltage] for $100 total.
I'm going to have to mesure how many amps that they are actually putting out someday,
but 2 of those and my original 3, 15 amp panels from habor freight keep me all juiced up.
I do not get very much direct sun at all maybe an hour a day.
68Camaro wrote:
Sounds like you've got a lot of experience, as well as a lot of hardware. If I'm reading you correctly from above you've picked up a lot of stuff. What is actually in use (panels, controller, inverter, batteries) and how is it hooked up? How long does it take with that setup to charge your batteries?
I'm like you, mostly shade. What full sun I get moves around a lot, so an hour of full sun on a fixed system is probably all I can count on this time of year.
68Camaro wrote:Decided to experiment and setup a cheap solar charging system with inverter to understand the technology (as well as give me another small option in the event of power issues, besides fossil fuel generators). Harbor Freight - <$150 in it complete so far. 15W/12VDC panel with a basic frame, a basic charge controller, a 12V sealed 35Ah deep-cycle battery, and a 200W MSW inverter. Just put it on the porch and even in the early morning shade it's pumping out it's 14+ V output (not sure the current) and charging the battery.
As I understand it this is a real basic system and based on blog feedback not dependable for long-term reliabilty. But lessons learned here may save money on any later investment in this technology.
If anyone else is either dabbling in or advanced in this stuff, I'd like to discuss it in this thread (or another).
Return to Non-Metals Necessities and Things To Think About
Users browsing this forum: No registered users and 7 guests