What did you scrap?

[adagirl]

Congrats crazy Tom! I am just getting started and I have only done $35.50 in aluminum cans

[CrazyTom]

Congrats crazy Tom! I am just getting started and I have only done $35.50 in aluminum cans

It all adds up!

[cwgii]

Today in So. AZ

24 lbs Alum Cans .74 lb (price drop .07 from Sept)

Thought this would be my last load for the year as it has been slow, but our dryer went out (17 years old!) So going to get a new washer and dryer. At least I'll get back .095 a pound on the old ones

Wow, you are getting .74 lbs for alum! Only .55 lbs here in GA

here in tucson, there is a price war. the lowball is 55. most are 61--63. while the place i go , is 73. that is a huge spread of .18

[hobo finds]

Today in So. AZ
410 lbs. sheet iron / steel .095 lb
26 lbs #2 ins wire @ .95 lb (price up .10 from Nov)
1 lb #1 ins wire @ 1.65 lb (price up .05 from Nov)

TTL $65.30

[adagirl]

Congrats crazy Tom! I am just getting started and I have only done $35.50 in aluminum cans

It all adds up!

Believe me I know. I am just getting started, and I am proud of my$35.50 so far. I have coworkers saving cans for me, so my yields will hopefully be better. I flip my fiat from scrapping into pennies to sort for Cu.

[smalltimeopn]

Small load yesterday:
8 lbs UBC @ .40
13 lbs steel @ .10

Happy New Year everyone!

[hobo finds]

Had to empty out the truck so took in 190 lbs sheet iron / steel got .095 for it in So. AZ

TTL $18.05

[Thogey]

$50.50 total ( $.58/lb for UBCs $.1005/lb for steel)

[Rodebaugh]

Should have got at least a hundred for that Toyota.

[Hades12]

UBC?


.12 a pound today for me. .135 on cars

[natsb88]

Should have got at least a hundred for that Toyota.

Nah, Toyotas are like plastic bottles and newspapers; a lot of places will take them, but they aren't worth anything.

UBC?

Used Beverage Cans/Containers

[Heartkill]

Today's load:

43# clean cast aluminum @ $0.53lb. - $22.79
13# aluminum radiators @ $0.42lb. - $5.46
5# MLC secondary @ $0.50lb. - $2.50
3# AL-FE 30-49% @ $0.15lb. - $0.45
19# yellow brass @ $1.88lb. - $35.72
3# #2 copper @ $2.72lb. - $8.16
198# electric motors @ $0.23lb. - $42.32
14# #2 copper insulated 39% @ $0.50lb. - $7.00
14# #2 copper insulated @ $1.20lb. - $16.80
2# lead coated copper wire @ $0.40lb. - $0.80

Total - $142.00

[Rosco]

Should have got at least a hundred for that Toyota.

Nah, Toyotas are like plastic bottles and newspapers; a lot of places will take them, but they aren't worth anything.



Yup Rice Wagons

UBC?

Used Beverage Cans/Containers

[hobo finds]

Todoy in So. AZ
380 lbs sheet iron / steel .10 lb

$38.00

[AGgressive Metal]

10 lb. unclean sheet
38 lb. aluminum cans/scrap aluminum

$21.95

[adagirl]

wow, we have an attorney scrapping too!

[hobo finds]

When looking over last years numbers I made more $ with less pounds! Thank goodness with the amount of other scrappers out there and the higher gas prices!

[adagirl]

When looking over last years numbers I made more $ with less pounds! Thank goodness with the amount of other scrappers out there and the higher gas prices!

That is awesome man, good for you!

[MUTiger]

Here is a MLK day run to the scrap yard.

60 lbs sheet iron @ $235 ton, $7.11
7 lbs alum sheet clean @ $0.50, $3.50
3 lbs cast alum @ $0.50, $1.50
26 lbs alum cans @ $0.50, $13.00
4 lbs Cu/Al radiator @ $1.32, $5.28
6 lbs #2 Cu @ $2.65, $15.90
9 lbs yellow brass @ $1.80, $16.20
7 lbs insulated wire @ $0.65, $4.55 This was low grade Christmas lights and computer wire (mouse and keyboard cords)
5 lbs insulated wire @ $1.10, $5.50 This was appliance cords etc.
2 lbs motor cores @ $0.23, $0.46
Grand total 129 lbs, $73.00

Since I am an engineer I dismantle everything into components before trashing to "see how it works." Sometimes even my daughters have some interest.
The stuff above came from a Haier dehumidifer, a very old hedge trimmer my FIL found on road (I used for about 8 years), weed eater, water softener valve and other plumbing fixtures and cords from anything thrown away after dismantling of course.

Fun stuff, and I got enough seed money for three more boxes of pennies.

After previewing I notice I can not get the columns to line up. Oh well. I suppose I might be able to use the list but too lazy to try.

mutiger

[MUTiger]

The stuff above came from a Haier dehumidifer.

I forgot to mention in the previous post. Do NOT buy a Haier dehumidifer. Spent around $175 and it lasted one summer in our basement. I then did some research online and basically found out that they are junk. I should have done the research first. The thing still acted like it worked but did not remove the humidity. I suspect the compressor or radiator had a leak and all the refrigerant leaked out. I got about $6.00 scrap value for it. I saved the swirl cage, motor and housing to make a little blower fan for the garage.

mutiger

[cwgii]

took in a mixed load. my 'tin cans' got .105 this time. some bed frames, xmas lights, which surprised me at their value. and to think of all the ones i passed up before xmas. oh well. live and learn.

[jimineez]

got a check for $133 from my father in law yesterday after he cleared out a small pile of copper pipe I've been saving up form a rental house repair last year and took it to the local yard... Wish I could find some more!

[hobo finds]

220 lbs sheet iron @ .105 lb in So. AZ

$23.10 TTL

[hobo finds]

300 lbs sheet iron/ steel .10 a pound in So. AZ
$30.00 total
175 pounds of it was a steel safe that I found!

[TheJonasCollegeFund]

300 lbs sheet iron/ steel .10 a pound in So. AZ
$30.00 total
175 pounds of it was a steel safe that I found!

Found a safe.....well what did you scrap from the inside????