CrazyTom wrote:I haven't taken it in yet for scrap. And I wouldn't take it all by itself assembled. A smart scrap yard would probably refuse it outright when in one piece or ding you with a significant down check thanks to the stone weights.
hobo finds wrote:23 lb #1 plastic @ $.20 lb
14 lb. Alum cans @ $.75 lb.
$15.10 total
Dr. Cadmium wrote:584 lbs mixed wire @ $0.50/lbCrazyTom wrote:I haven't taken it in yet for scrap. And I wouldn't take it all by itself assembled. A smart scrap yard would probably refuse it outright when in one piece or ding you with a significant down check thanks to the stone weights.
Taking apart most modern washers is a waste of time unless you are going after reuseable parts. Most, if not all yards in my area will accept them intact despite the counterweights, and the components inside aren't worth much separated. As you've discovered, the electric motors in modern appliances are smaller. They also often have aluminum instead of copper windings, so they sell as irony aluminum instead of electric motor scrap ($0.10/lb vs. $0.13 at my local yard). The wire harness tends to be lower grade wire. The circuit boards are mostly low grade and not worth the time to separate by hand. Unlike dryers, they rarely contain loose coins or other valuable items.
AGgressive Metal wrote:Its interesting seeing all the categories that different yards use. I've never seen some of the ones you guys post and I scrapped for years.
Users browsing this forum: No registered users and 2 guests