Hallmark help

Discussions about scrap yards, scrap yard prices, melting, refining, and obtaining metals from scrap or unconventional sources.

Hallmark help

Postby TheJonasCollegeFund » Wed Jul 25, 2012 4:28 pm

Where is a good place to look for all types of hallmarks.....from pewter to silver and everything in between????


THANKS!
User avatar
TheJonasCollegeFund
Too Busy Posting to Hoard Anything Else
 
Posts: 7137
Joined: Fri Apr 04, 2008 3:00 pm
Location: HoosierLand, USA

Re: Hallmark help

Postby Merwanseth » Wed Jul 25, 2012 5:19 pm

Merwanseth
Penny Sorter Member
 
Posts: 68
Joined: Tue Mar 08, 2011 3:07 pm

Re: Hallmark help

Postby TheJonasCollegeFund » Wed Jul 25, 2012 6:01 pm

Merwanseth wrote:try this site:

http://www.925-1000.com/

No help.

And that site is not user friendly.

Thanks, though!!!!
User avatar
TheJonasCollegeFund
Too Busy Posting to Hoard Anything Else
 
Posts: 7137
Joined: Fri Apr 04, 2008 3:00 pm
Location: HoosierLand, USA

Re: Hallmark help

Postby Robarons » Sat Jul 28, 2012 3:36 am

If it helps pewter will always be marked pewter unless its fairly old (in which you shouldnt be scrapping it!)

Also you should be able to bend it with your hands because the metal is so soft. You can not do this with Sterling, silver plate.
Robarons
Post Hoarder
 
Posts: 2206
Joined: Tue Sep 18, 2007 3:00 pm

Re: Hallmark help

Postby Engineer » Sat Jul 28, 2012 3:48 pm

User avatar
Engineer
Super Post Hoarder
 
Posts: 3266
Joined: Thu Jan 12, 2012 5:08 am

Re: Hallmark help

Postby TheJonasCollegeFund » Sat Jul 28, 2012 4:39 pm




Good one...! :D

You got me! :roll:
User avatar
TheJonasCollegeFund
Too Busy Posting to Hoard Anything Else
 
Posts: 7137
Joined: Fri Apr 04, 2008 3:00 pm
Location: HoosierLand, USA

Re: Hallmark help

Postby TheJonasCollegeFund » Sat Jul 28, 2012 4:43 pm

Robarons wrote:If it helps pewter will always be marked pewter unless its fairly old (in which you shouldnt be scrapping it!)

Also you should be able to bend it with your hands because the metal is so soft. You can not do this with Sterling, silver plate.


After no luck I am leaning on silver plated copper. It's a fairly large pitcher. But once I looked at it better on it's inside, I can see where it was used as storage for something that wore away the plating in spots. It looks rusty in spots(orangish/brown) yet doesn't stick to my LARGE magnet.

Any thoughts, now??
User avatar
TheJonasCollegeFund
Too Busy Posting to Hoard Anything Else
 
Posts: 7137
Joined: Fri Apr 04, 2008 3:00 pm
Location: HoosierLand, USA


Return to Scrap Metal Salvage

Who is online

Users browsing this forum: No registered users and 8 guests

cron