What did you scrap?

Discussions about scrap yards, scrap yard prices, melting, refining, and obtaining metals from scrap or unconventional sources.

Re: What did you scrap?

Postby AGgressive Metal » Tue Jul 02, 2019 8:13 pm

Its interesting seeing all the categories that different yards use. I've never seen some of the ones you guys post and I scrapped for years.
And he that hath lyberte ought to kepe hit wel
For nothyng is better than lyberte
For lyberte shold not be wel sold for alle the gold and syluer of all the world
-Aesop's Fables, Caxton edition 1484

http://stores.ebay.com/commonwealthcurrency
http://www.ebay.com/usr/pdx_metal
User avatar
AGgressive Metal
Realcent Moderator
 
Posts: 5922
Joined: Sat Dec 13, 2008 10:00 am
Location: Portland

Re: What did you scrap?

Postby Dr. Cadmium » Thu Jul 04, 2019 9:35 pm

584 lbs mixed wire @ $0.50/lb

CrazyTom wrote:I haven't taken it in yet for scrap. And I wouldn't take it all by itself assembled. A smart scrap yard would probably refuse it outright when in one piece or ding you with a significant down check thanks to the stone weights.


Taking apart most modern washers is a waste of time unless you are going after reuseable parts. Most, if not all yards in my area will accept them intact despite the counterweights, and the components inside aren't worth much separated. As you've discovered, the electric motors in modern appliances are smaller. They also often have aluminum instead of copper windings, so they sell as irony aluminum instead of electric motor scrap ($0.10/lb vs. $0.13 at my local yard). The wire harness tends to be lower grade wire. The circuit boards are mostly low grade and not worth the time to separate by hand. Unlike dryers, they rarely contain loose coins or other valuable items.
Dr. Cadmium
Penny Hoarding Member
 
Posts: 856
Joined: Mon Aug 02, 2010 3:00 pm
Location: USA

Re: What did you scrap?

Postby xippi » Fri Jul 05, 2019 10:46 pm

07/05/19
#493 Tin/Light Iron $110.00 GT $24.22 Dryer, Water tank, dishwasher, ac, heat exchanger.
#4 AL Old Sheet $0.27 LB $1.08
#13 AL CU Radiators $0.87 lb $11.31
#18 AL CU Rad dirty $0.72lb $12.96
#5 Yellow Brass $1.32lb $6.60
#7 #2 Copper $1.84 lb $12.88
total $69.05

almost all my white goods go whole.
I grab the brass and copper off tank. any power cords or loose easy to get wire. Ac and Heat exchanger i break down for the Copper and ACR , sometimes i cut the FE ends off of the ACR depends on Time/storage/difficulty/ dirt dirty they are.
xippi
Penny Collector Member
 
Posts: 471
Joined: Tue Jun 26, 2012 5:52 pm
Location: Massachusetts

Re: What did you scrap?

Postby Dr. Cadmium » Tue Jul 09, 2019 1:49 pm

260 lbs light iron $95/GT
24 lbs #1 steel 175/GT
18 lbs mixed Al 0.33/lb
16 lbs irony Al 0.10
7 lbs extruded Al 0.39
4 lbs stainless steel 0.25
2 lbs #1 copper 2.00
13 lbs #2 copper 1.75
3 lbs brass 1.30
39 lbs batteries 0.25

Total $64.58, rounded up to $64.60

Also, 155 returnable cans and bottles for $7.75
Dr. Cadmium
Penny Hoarding Member
 
Posts: 856
Joined: Mon Aug 02, 2010 3:00 pm
Location: USA

Re: What did you scrap?

Postby xippi » Tue Jul 09, 2019 2:52 pm

07/08/19 E-scrap
#21.5 Finger cards/cd $3.00 $64.50
#39 Green Mother Boards $1.60 $62.40
#9 Colored Boards $1.30 $11.70
#8 Double Socket $2.25 $18.00
#1.85 HD Boards $8.50 $8.50
#3.16 RAM $14.50 $14.50
#0.12 Green Fiber $10.00 $1.20
#0.03 High Grade Ceramics $105.00 $5.25
#0.08 Black fFber $25.00 $1.30
#0.14 Slot Processors $9.25 $9.25
#1.95 Pentium 4 Pin/Pinless $4.75 $9.26
#0.07 Low Grade Ceramics $28.00 $1.96
239.11
07/09/19 Worcester MA
#708 Tin/Light Iron $110.00 $34.79
#20 #1 HMS Steel $180.00 $1.60
48 AL Old Sheet $0.27 $12.96
41 AL CU Radiators $0.87 $35.67
40 Yellow Brass $1.32 $48.84
#8 #2 Copper $1.84 $14.72
#30 #2 Cu Insulated <3 $0.18 $5.40
#30 #2 Cu Insulated 40% $0.36 $10.80
#4 S/S 304 Prepared $0.18 $0.72
#24 Batteries $0.25 $6.00
171.50
$.05 ea Bottles and Cans $10.25
combined Total 420.86
xippi
Penny Collector Member
 
Posts: 471
Joined: Tue Jun 26, 2012 5:52 pm
Location: Massachusetts

Re: What did you scrap?

Postby cwgii » Tue Jul 09, 2019 5:05 pm

287# NO 1 PLASTIC. price dropped more 0.25
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby hobo finds » Sat Jul 13, 2019 9:56 am

23 lb #1 plastic @ $.20 lb
14 lb. Alum cans @ $.75 lb.

$15.10 total
hobo finds
Too Busy Posting to Hoard Anything Else
 
Posts: 5939
Joined: Mon Dec 29, 2008 3:00 pm
Location: Tucson

Re: What did you scrap?

Postby cwgii » Sat Jul 13, 2019 10:51 am

hobo finds wrote:23 lb #1 plastic @ $.20 lb
14 lb. Alum cans @ $.75 lb.

$15.10 total

With card?
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby hobo finds » Sat Jul 13, 2019 1:51 pm

Went to can it prices with coupon from Tucson Weekly
hobo finds
Too Busy Posting to Hoard Anything Else
 
Posts: 5939
Joined: Mon Dec 29, 2008 3:00 pm
Location: Tucson

Re: What did you scrap?

Postby cwgii » Sun Jul 14, 2019 3:09 pm

Dr. Cadmium wrote:584 lbs mixed wire @ $0.50/lb

CrazyTom wrote:I haven't taken it in yet for scrap. And I wouldn't take it all by itself assembled. A smart scrap yard would probably refuse it outright when in one piece or ding you with a significant down check thanks to the stone weights.


Taking apart most modern washers is a waste of time unless you are going after reuseable parts. Most, if not all yards in my area will accept them intact despite the counterweights, and the components inside aren't worth much separated. As you've discovered, the electric motors in modern appliances are smaller. They also often have aluminum instead of copper windings, so they sell as irony aluminum instead of electric motor scrap ($0.10/lb vs. $0.13 at my local yard). The wire harness tends to be lower grade wire. The circuit boards are mostly low grade and not worth the time to separate by hand. Unlike dryers, they rarely contain loose coins or other valuable items.

I have solod the drums off both washers ,dryers as burn barrels, firepits.
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby cwgii » Tue Jul 16, 2019 8:27 am

#64 cans at .80, #12 crushed plastic at .25
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby xippi » Tue Jul 16, 2019 2:48 pm

#1317 Tin/Light Iron $110.00 GT $64.69
#14 AL Old Sheet $0.27 lb $3.78
#12 AL FE Mid Grade $0.11 lb $1.32 TV wall bracket
#3 Yellow Brass $1.35 lb $4.05
#2 #2 Copper $1.88 lb $3.76
#9 #2 Cu Insulated <3 $0.20 lb $1.80
#11 #2 Cu Insulated 40% $0.38 lb $4.18
#32 Batteries $0.26 lb $8.32

Total $91.90
the dime I got from the scrapyard is a 1939 Mercury head dime. :thumbup: :thumbup:
Also found 2 zinc pennies in the yard.

most of my washing machines have plastic tubes. they take em whole with the water and any counter weights, not worth the time to take apart and would probably get less for em.
most of my dryers metal tubes are so cheap they wouldn't make a good burn barrel for long. They go whole also.
xippi
Penny Collector Member
 
Posts: 471
Joined: Tue Jun 26, 2012 5:52 pm
Location: Massachusetts

Re: What did you scrap?

Postby cwgii » Thu Jul 18, 2019 10:55 pm

#468 shred , tin cans, frdge casing, bike, racks from dishwasher, a chair.down to 80 ton.
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby hobo finds » Fri Jul 19, 2019 5:39 pm

I donated 9 bikes that I had found that were too good to scrap for 4 cents a pound... two even had aluminum frames. I donated them here https://bicas.org/

I wanted to donate them here https://www.azwfk.org/ but they had no room until after summer when they get more help fixing up the bikes
hobo finds
Too Busy Posting to Hoard Anything Else
 
Posts: 5939
Joined: Mon Dec 29, 2008 3:00 pm
Location: Tucson

Re: What did you scrap?

Postby hobo finds » Sat Jul 20, 2019 10:00 am

180lb sheet iron $.04 lb.
hobo finds
Too Busy Posting to Hoard Anything Else
 
Posts: 5939
Joined: Mon Dec 29, 2008 3:00 pm
Location: Tucson

Re: What did you scrap?

Postby cwgii » Sat Jul 20, 2019 3:05 pm

#200 clean sheet 115/ton
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby xippi » Mon Jul 22, 2019 7:07 pm

#380 Tin/Light Iron $110.00 $18.66
#13 AL CU Radiators $0.89 $11.57
#23 AL CU Radiators Dirty $0.76 $20.52
#2 Yellow Brass $1.35 $2.70
#6 #2 Copper $1.88 $11.28
#12 Batteries $0.26 $3.12

Total $67.85
xippi
Penny Collector Member
 
Posts: 471
Joined: Tue Jun 26, 2012 5:52 pm
Location: Massachusetts

Re: What did you scrap?

Postby cwgii » Mon Jul 22, 2019 10:13 pm

#150 al um cans , .80
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby cwgii » Thu Aug 01, 2019 5:51 pm

yest took a load of crushed water bottles.. not my regular buyer.. days off. rhe replacement would not give me a bonus. drove away. sooooo will see what happens tonmorrow,. new month,.. even lowere prices???
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby Recyclersteve » Thu Aug 01, 2019 10:59 pm

AGgressive Metal wrote:Its interesting seeing all the categories that different yards use. I've never seen some of the ones you guys post and I scrapped for years.


Totally agree.
Former stock broker w/ ~20 yrs. at one company. Spoke with 100k+ people and traded a lot (long, short, options, margin, extended hours, etc.).

Please note that ANY stocks I discuss, no matter how compelling, carry risk- sometimes substantial. If not prepared to buy it multiple times in modest amounts without going overboard (assuming nothing really wrong with the company), you need to learn more about the market and managing risk. Also, please research covered calls (options) as well.
Recyclersteve
Too Busy Posting to Hoard Anything Else
 
Posts: 4470
Joined: Sun Jan 20, 2013 5:59 am
Location: Where I Want To Be

Re: What did you scrap?

Postby cwgii » Fri Aug 02, 2019 4:38 pm

Boohoo, turned in 163 # plastic. At .25
..2 hours I find out a new place is paying .40 OUCH.
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby cwgii » Fri Aug 02, 2019 4:42 pm

Saw a sign, empty 6 packs needed, at a liquor store. Had a box in the trk for recycling...took it in. They pay , ,.10 each. Got 6.20, picked out a 6 pack...13.44 loosing propitiation.
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby xippi » Fri Aug 02, 2019 10:20 pm

#240 #1 HMS Prepared $180.00 $19.30
#1125 Tin/Light Iron $110.00 $55.24
#4 AL Old Sheet $0.27 $1.08
#39 AL CU Radiators $0.88 $34.32
#50 AL CU Radiators Dirty $0.74 $37.00
#11 Yellow Brass $1.35 $14.85
#17 #2 Copper $1.76 $29.92
#14 Batteries $0.26 $3.64

total $195.35
todays score was a bunch of sixties license plates including a German"duty free" and pair of French Tourist transit 'TT" , pair of 1958 from Texas that I gave to owner of the Texas Bbq where i had lunch, for his wall "they don't get much older then these" :mrgreen:
xippi
Penny Collector Member
 
Posts: 471
Joined: Tue Jun 26, 2012 5:52 pm
Location: Massachusetts

Re: What did you scrap?

Postby cwgii » Sat Aug 03, 2019 3:13 pm

65# PLASTIC at .40 .
cwgii
Too Busy Posting to Hoard Anything Else
 
Posts: 4400
Joined: Sun Oct 12, 2008 10:00 am
Location: tucson

Re: What did you scrap?

Postby hobo finds » Sat Aug 03, 2019 6:14 pm

On another scrap metal forum I am on people are position about $1.00 a ton for white goods in the Dakotas, that's very bad indeed.
hobo finds
Too Busy Posting to Hoard Anything Else
 
Posts: 5939
Joined: Mon Dec 29, 2008 3:00 pm
Location: Tucson

PreviousNext

Return to Scrap Metal Salvage

Who is online

Users browsing this forum: No registered users and 4 guests